Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.
December 1991
Issue 78
- Box Joint Jig
- Page 26: Instructions for Index Plate and Pin, and Figure 9
- Instructions and Figure 9 indicate that piece G- Index Pin is 2 3/4" long but it should be 1 3/4".
- Display Cabinet
- Page 12: Figure 12
- Upper vertical divider (HH) measurements are incorrect. From left to right, they are printed as: 13 3/4" , 11 1/2" , 11 1/2" , 13 3/4" but they should be: 13 5/8" , 11 5/8" , 11 5/8" , 13 5/8".
- Sewing Box
- Page 19: Materials List, Supplies
- Two errors. 1. List says that 16 1/2" Extra-Long Brass Rivets are needed but it should be 18. 2. List says that 16 #6 Flat Brass Washers are needed but it should be 18.
- Page 22: Instructions for installing arms with rivets
- Directions recommend setting the rivets using a sharp hammer blow from inside the case, but it may be difficult to swing the hammer in this limited space. Therefore we recommend placing a small drop of "Loctite" or another slow cure, cyanoacrylate glue (super glue) inside the cap before attempting to squeeze the two parts of the rivet together. This method should also serve to set the rivets if there are small variations of the inside diameter of the rivet cap.