Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.
February 1996
Issue 103
- Desk Organizer
- Page 16: Figure 5, detail b.
- Back molding (F) measurement printed as 3/4" but it should be 1/2".
- Roll-top Desk
- Page 7: Materials List
- Length measurements for three pieces are incorrect: Item L Lift Rail printed as 1/2 x 1 3/4 – 40 1/2 but should be 1/2 x 1 3/4 - 40 3/8. Item M Tambour Slat printed as 5/16 x 3/4 - 40 ½ but should be 5/16 x 3/4 - 40 3/8. Item N Rail Support Strip printed as ¼ x ½ - 40 but should be 1/4 x 1/2 – 39 7/8.
- Page 10: Figure 8, detail a
- Top right measurement originally printed as 3 3/4" but should be 3 1/4".
- Page 12: Tambour door, lift rail instructions .
- Rail length indicated as 40 1/2" but should be 40 3/8".
- Page 12: Tambour door, cross-section illustration a.
- Cross-section illustration piece (N) mislabled as Rail Support Slat but should be Rail Support Strip. Also the length measurement should be 39 7/8".
- Page 12: Cross-section illustration b.
- Piece (N) mislabeled as Rail Support Slat; should be Rail Support Strip.
- Page 12: Instructions referring to rail support strip.
- Piece should be called a Rail Support Strip, not Slat. Length printed as 40" but should be 39 7/8".
- Page 11: Figure 10
- The illustration shows the routing in the wrong direction.