Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.
December 2008
Issue 180
- Flat Screen Media Center
- Page 37: Main illustration
- The bead molding in the main drawing is shown as part EE, but it should be labeled as part T. The Materials, Supplies & Cutting diagram on page 33 and the drawing on page 36 correctly show the bead molding as T.
- Page 33: Materials, Supplies & Cutting Diagram
- Part F (Face Frame Ends) under the Side Base Cabinet should have a length of 31-1/4" not 31".
- Page 34: Classic Cove Bit
- Clarification: The classical cove bit has a 5/16" radius.
- Page 33: Materials, Supplies & Cutting Diagram
- Part FF (Side Veneers) should be 11" x 13-1/4". The drawing on page 40 is correct.
- Page 33: Online Extra Cutting Diagram
- The plywood thicknesses on the second page of the online cutting diagram were originally shown incorrectly. The full sheet plywood with pieces GG, FF, R, E, N and EE should be 1/4" thick. The half sheet with pieces P and BB should be 3/4". (The PDF has been replaced on woodsmith.com.)
- Page 33: Materials, Supplies & Cutting Diagram
- Part W (drawer fronts/backs) should be 10" long, not 10 1/2" as shown in the materials list. The art on page 37 shows the correction dimensions.
- Hanging Wall Shelves
- Page 51: Wall Shelves Sources
- There is a typo; the word "includes" is misspelled
- Page 19: Detail a Illustration
- The depth of the cut should be 3/8", not 1/2" as printed.
- Shop Notebook
- Page 28: Figure 1
- The centerpoint of the radius is listed at 2" but it should be 2 1/2" in order for the cutout to match what's shown on page 24 of the Snack Tray Cabinet project.
- Tenons on the Router Table
- Page 44: Online extra reference
- The online extra bug in the margin should not be there. All the information is included in the article and there is no online extra.