Updates & Revisions - Woodsmith Magazine

Updates & Revisions

Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.

Woodsmith Issue 216 cover image

December 2014
Issue 216

Sources
Page 51: Tips & Techniques Sources
The item number for the Magnetic Holder from Travers Tools was printed slightly incorrectly; it should be 99-001-023 rather than 99-001-23.
Shop Notebook
Page 31: Figure 1
The extension lines for the two dimensions that show the 3" width of the concave caul in Figure 1 should point to the bottom edge of the hardboard strip (waste side), not the top edge as shown.
Stylish Dining Chairs
Page 36: Figure 1, Detail 'a'
The 1/4" dimension from the rip fence to the edge of the groove is inaccurate. The groove should be centered.
Page 34: Back leg pattern & detail 'b'
The length of the upper mortise in the back leg is incorrect. It should be 2 1/8", not 2 1/4".