Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.
April 2018
Issue 236
- Desk Lamp
- Page 20: Detail 'b'
- In detail 'b' in the main drawing, we incorrectly dimension the spacing between the kerfs. The numbers are correct, but the leader lines should not be centered on the kerfs. They should instead line up with edge of the kerfs. The thickness of the kerf should be 1/16". This also affects detail 'a' in Figure 1 of the How-To box.
- Page 20: Detail 'a'
- In Figure 1, detail 'a', the 3/8" dimension should be 7/16".
- Page 22: Materials List
- The materials list lists the Shoji paper as 8.5x12". However, the paper needs to be at least 14.5" to fit. The Shoji paper should be 8.5x16" instead.
- Router Table Storage
- Page 41: Materials list
- Parts E and F should be 1/4" hardboard, not 3/4" plywood.